www.cgcc.ca

Hi, I picked up a PVM 2530 yesterday and brought it home. I tested it by bringing my snes with me. When I got it home, was able to use it for a while and then started to experiment with the settings on the front. After trying to adjust the brightness settings, The display just shut off and all the l...

I ended up finding a PVM. Posted prices.

Hello fellow cgcc.ca members

looking to sell:
-CPS2 A Board ($100)
-Super Street Fighter 2 Turbo (Blue) ($300)
-Street Fighter Alpha 3 (Blue) ($250)



Thanks,

My direct swap came in the mail from ebay today. I installed it with no issues and it booted up perfectly.

Hey All,

I ordered a similar part off eBay. Will test and post the results once it arrives.

To complement my dead PSU, I now have a dead ISO transformer in my cabinet. I've tested power from the wall up until the ISO transformer where it cuts off. The fuse died and I replaced it but still nothing. A few questions here: 1: Should I buy the exact same model (MPI-650-230)? There are lower ver...

I have no idea if we should be. I've seen tons of debate online and it's pretty unclear as some people run it at 120 and some run it at 100. I might rewire the two prong switch from the outlet to a three prong while I'm at it and use a better power bar. I don't think the one I initially had in there...

Hey All, After using the NAC cabinet for approximately a month in the current setup, after switching off the switch in the back I experienced the same issue. I've narrowed it down to the powerbar which is relatively new. After swapping it out and using clean power from my outlet, everything is worki...

UPDATE: Thanks to leonk for showing me his setup. I accomplished exactly what he did and the astro city is back up and running. I even set up the setting in the bios to power on when power is cut. Everything works with one switch at the back. One thing I wanted to ask was, My powerbar that is conne...

UPDATE: Thanks to leonk for showing me his setup. I accomplished exactly what he did and the astro city is back up and running. I even set up the setting in the bios to power on when power is cut. Everything works with one switch at the back. One thing I wanted to ask was, My powerbar that is connec...

Hi All, I was using my NAC briefly last night, I flicked the switch on the back to turn off the monitor. When I got back flicking the switch causes nothing to turn on. I currently have a mame PC in there but no marquee light, or video is appearing. I looked at the fuse on the psu and everything look...