www.cgcc.ca

All those offers and it's still available.

Tempest. One of my faves. Wish I was closer.

That would be great, if you could do that when you get a chance. No big hurry.

So being a bootleg, and by the way you are talking, I assume it doesn't use the same connectors as the original?

Hey guys, just wondering what some of your takes are on this Global Shipping Program Ebay uses. From the last two packages I had sent to me, it looks like nothing more than another bogus fee Ebay charges to slap another address label on it. Ebay does not clear the package nor does GSP, it gets clear...

This game was working and then all of a sudden booting to random error screens and now just this one. Welcome to the world of Galaga - I repair my own Galaga boards at least twice a year (mind you, I play the game a lot too ;-) ). Well, if you ever feel like taking on one more, let me know and we c...

Yea, that's part of my main problem, I have no one local around here that have a board I can take this to. Why I 'm reaching out here. I did swap all the 2114's with known working and no avail. When I started probing some of the chips, I find several dead/floating pins on a lot of chips. and then it...

I have done the full renew kit. All new sockets and resistor packs, cleaned the legs etc. As far as shipping, that costs me next to nothing, I work for a courier. This is the screen I was getting before and after the rebuild. http://i656.photobucket.com/albums/uu287/RileyB_09/IMG_20150622_080826675_...

Yes. With no real pinouts/schem on these or easily accessible replacements, I just want to confirm them working, these boards are pain enough to try work on, then I can move onto troubleshooting the more common chips.

Just wondering if anyone has a working Galaga PCB. I would like to send you the Custom IC's to verify them working or vice versa. Of course, I will pay shipping both ways. Thanks.

Just wondering if anyone has one of these kicking around collecting dust

I know this is a rather old post to update, but I can answer your question. You need to connect CRT pin 5 to 466 connector 2 (NOT 4). If you make this correction, your B&K 466 will automatically multiplex (switch) to read each gun emission you have your color knob set to. so here is the CORRECT...

I would hold off on the 128 in 1. Reviews on these are not that great until they can improve or update the pcb. I know this from experience. Game play is to be expected, but configuration and interface is very very horrible. Further to the other thread I thought I would start a fresh one... Prices a...

PM sent

I could possibly have one. I haven't tested it yet and still want to recap it as I do with all my monitors.